We wish you a very Happy New Year !

Minipleat HEPA Filters H-14

High Quality HEPA Filters
MINIPLEAT Design lowers operating costs

Lightweight and compact
Low Off-gassing components
Wide range of efficiencies
Leak and/or scan tested

This is a unique family of MINIPLEAT HEPA Filters specially designed to meet the demanding airflow and particulate control requirements of clean room applications.

It is available with knife edge or gasket seal frames for installation in any type of grid system or frame.

These filters are custom built to provide the optimum solution for a wide range of application requirements. Available with a variety of media pack configurations and meeting the classification range of from H-14 in accordance with EN 1822.

These filters are designed for use in clean rooms, clean benches, semiconductor pharmaceutical, biotech, food processing and other industries in which airborne contaminants must be carefully controlled.

MINIPLEAT Design Lowers Operating Costs

The MINIPLEAT design combines maximum efficiency with low pressure drop, thus reducing operating costs.
Special thermoplastic heads are used to maintain equal spacing between pleats for optimal airflow, resulting in high dust holding capacity and full use of the entire depth of the filter.

Lightweight and Compact

Made of moisture resistant and fire-retardant glass fiber media.
The media pack is permanently bonded to the lightweight anodized extruded aluminum frame, with a DIN classified, white urethane adhesive.
A white epoxy faceguard on both air leaving and air entering sides protect media from damage.

Low Off - Gassing Components

All components used are low off -gassing designed to meet the stringent requirements of research labs and industries.

Efficiency

Conforming to EN1822@MPPS

Classification

99.999% @0.3µm

99.995%

H-14

Leak and/or Scan Test

All MINIPLEAT HEPA filters meet the criteria specified for its application and are scanned to eliminate pinhole leaks with a laser spectrometer with PSL particles to determine the overall efficiency in accordance with IEST-RP-CCO34-1.

TECHNICAL SPECIFICATIONS

Maximum Operating Temperature

70° C (158° F)

Average Face Velocity

0.45 m/s

Frame

Anodized extruded aluminum

Separators

Thermoplastic

Sealant

Fire retardant polyurethane sealant

Gasket

One piece foaming polyurethane

Faceguard Location

Epoxy Powder coated steel

Media

Moisture resistant and fire -retardant fiber glass media

Antimicrobial

The prescence of antimicrobial in the filter media is intended to preserve the integrity of the media throughout the useful life of the filter.

# Our ceaseless R&D and improvements may result in design, specification and colour changes at any time.

Manufacturer and Exporter of Minipleat HEPA Filters, Conventional HEPA Filters From India