We wish you a very Happy New Year !

DE-HUMIDIFIER (MSW-131)

simple and low cost effective solution to humidity control
 
Dehumidifier
Applications
  • The purpose of DE-HUMIDIFIER equipment is to protect against damage by moisture to Agricultural Products, Life Saving Drugs, Food Products, Electrical & Electronic Components, Instrumentation, Plastic, Rubber Paper, Metal and to any other substances which are sensitive to moisture. This has a wide end use.
  • Dehumidifier most useful where the products requiring drying are temperature sensitive.
Function
  • The DE-HUMIDIFIER has an INDIVIDUAL FUNCTION to condense the moisture. The tendency of moisture always is to flow from higher moisture zone to the lower moisture zone. Thus the moisture flows between the substances in the room and the space. The function of the DE-HUMIDIFIER is to reduce the moisture content in the space. During the process of Dehumidification the space becomes gradually dry and accordingly moisture flows from the materials to the space. At the same time moisture infiltrates to the space through structure, crevices around doors, windows, ceiling, partitions and while opening the entry doors as the vapour pressure is higher outside than inside the room. Further moisture will also be added to the space by hygroscopic substances and persons working in the space.
Capacity
  • The DE-HUMIDIFIER offered is suitable for a volume of upto 1500 cuft to control humidity of upto 30%RH +3% (Depending upon the ambient temperature and humidity conditions) with an occupance of maximum three people in the air conditioned room and the structure vapour sealed. In case if the area is larger and the human occupancy is more than three, it will be necessary to install sufficient number of DE-HUMIDIFIER equipment to match up with the moisture load in the space to be Dehumidified. We advise you to apply vapour proof or glossy oil paint on the walls and ceiling to minimise the permeation of moisture in to the room.
  • The DE-HUMIDIFIER equipment draws air from the room and puts it back into the room duly dehumidified. The outlet air from the room will be warm and dry. The room temperature will rise due to addition of latent heat on account of moisture removal. Hence it is necessary to have a window type air conditioning unit to compensate for the dehumidifier heat load in the room. Dehumidifier equipment is required to bring down relative humidity levels while the air conditioner is required to control the temperature in the room.
Technical Specifications & Ordering Informations
Type
Water condensing type based on “refrigeration cycle”.
Compressor
Hermetically sealed compressor.
Advantage
Eliminates use of costly chemicals.
Coils
Both the heat exchanger and water condensing coils are made of copper pipes.
Fan Motor
Heavy duty single shaft motor with high static fan for long throw of dehumidified air for better circulation of air in the room.
Water Tank
Water collecting tank is provided with the unit to “off load” the condensate water.
Chasis
Compact and occupies minimum floor space. Designed on a heavy frame and quick removable sheet metal panels for servicing and maintenance. Fitted with heavy duty caster wheels to avoid additional trolley and for easy portability.
Control (OPTION)
Analogue control through a Humidistat OR Microprocessor Based Digital Humidity Indicator-cum-Controller.
High Voltage Protection (OPTION)
Through automatic voltage stabilizer.
MODEL
#DH-15(A)
#DH-15(D)
Compressor Type
Heavy duty low back pressure
Heavy duty low back pressure
Volume Covered
Suitable for 1500 Cuft
Suitable for 1500 Cuft
Humidity Control
Analog Humidistat
Microprocessor Based Digital Controller
Safety Device
AUTO TIME CONTROLLED safety device for compressor, in case humidity controller fails.
Power Supply
220/230V AC, 50/60Hz

dehumidifier, dehumidifier environmental controller, humidifiers